Your clients build on your data. Make sure it holds up.

In The Survey Accelerator, a licensed surveyor works alongside your business for twelve months. I review your client deliverables before they go out, we meet one to one every month, and we build your control, field procedures and QC together.

  • Deliverables reviewed before the client sees them
  • A monthly hour, one to one, on your real jobs
  • Procedures and QC written down for your crew
Rami Tamimi

Rami Tamimi
Licensed Professional Surveyor, founder of The Survey School

See if it fits your business.

About a minute. If it fits, you pick a time to talk with Rami.

Your answers go to Rami and nobody else. See the privacy policy.

If the business runs on your data, one of these is on your mind.

“A client asked for better accuracy than I have ever had to prove.”
“Steady work is going out, and nobody checks it but me.”
“One busted job would cost me more than the job paid.”
“I can fly it and process it. I am not sure I could defend it.”
“I am turning down work I would rather keep, because I cannot stand behind the deliverable.”
“Every job is set up a little differently. Nothing is written down.”

None of these is about flying or processing. They are about whether the work will hold up when someone who knows what to look for checks it.

A licensed surveyor working alongside your business for a year.

Your deliverables, reviewed before they go out

On the real jobs, while there is still time to change something. You send the control, the checks and the deliverable. I tell you what holds and what does not.

An hour, one to one, every month

On whatever is holding the work back: a job that will not close, a client asking for more than you have delivered before, how to scope and price the next one.

Your control, field procedures and QC, built with you

Written down, so the checking still happens on the jobs I never see and on the days you are not the one in the field.

Workflows, SOPs and a plan for the business

What to offer, what to hand over, and how to say what your accuracy is and how you know.

Everything in The Survey School

The six courses, the weekly live lecture and Q&A, and the community of members and licensed surveyors.

What I do not do

I do not sign, seal or certify your work, and the Accelerator is not a way around a license. I make sure the data is right and the checks are written down before it reaches the people who do sign things.

Three steps, and the first one takes a minute.

01

Apply

A few questions about the business, below. About a minute.

02

Talk with Rami

If it looks like a fit, you pick a time. Thirty minutes on Zoom, about your jobs, not a script.

03

Start

If we both think it fits, we start with the job you have on right now.

I read every deliverable myself, so I only work with a small number of businesses at a time. If there is no room when you apply, I will tell you on the call.

Who this is for.

It fits if

  • You own the business, and survey or mapping work is going out to clients now.
  • You want your deliverables checked by a licensed surveyor before the client sees them.
  • You want procedures your crew can follow, so the quality does not depend on who was in the field that day.

It is not for you if

  • You are still learning the skill, or the client work has not started. The Survey School is the right start.
  • You want someone to stamp your work. I do not, and nobody should offer you that.
  • You work for a company. Ask about a team plan, or join the School yourself.

Wins from the community.

Posted by members in the community, in their own words.

Mark NielsenApril 2025

Summer student on a 1.2 km bridge

“The project is a 1.2 km-long elevated bridge for a transit project. I was asked to give the surveyor a hand. He didn't expect much... He didn't know I'm also a survey school student here, and the information I've gained here is paying off well.”
A total station on a tripod set up on a sidewalk next to a construction site
Michael LilleyDecember 2025

Work through 2028

“After we got done he asked if I had my drone, of course I did... I said okay, he said good, because you're flying for us. Job doesn't start until April of 27, it's a design/build and the architect want a rough idea of where everything is and a close topo.”
Brook StocktonOctober 2026

My first resection

“I've never used a total station until today. Did my first resection with the A100. I used two RTK control points for the resection and held a third RTK point out as an independent check.”
A total station on a tripod in a grassy field with a GNSS pole behind it
James SnelsonMay 2026

New job

“I was recently hired and started with a local water/waste water/civil engineering firm. It is quite the stretch for me being a mechanical engineer but I'm really enjoying it so far.”
Andrew WalkerJuly 2025

My first plat

“I just finished my first PLAT from start to finish!! It had to be signed by my boss of course, but it was a very enlightening experience to see just how much work it takes to make one property into two.”
Thomas EschJune 2026

Pix4Dmatic Trainer Certification

“Completed the coursework and training and passed the Pix4Dmatic Trainer Certification exam... My son, James, also passed the Trainer Certification exam yesterday.”
A Pix4D certificate recognising Thomas Esch for completing the PIX4Dmatic trainer certification exam
J BaeJuly 2025

From carpenter to BIM field specialist

“I've created an incredible opportunity with a general contractor to handle layout using a total station and collaborate with their BIM team.”
Todd K CollinsMay 2026

Speaking to Florida's property appraisers

“I had the opportunity to attend the Florida State Property Appraisers Annual Conference and... was able to speak to... Property Appraisers from Florida about the benefit of using drones to conduct flight missions and collect current data on properties.”
A conference room with a speaker at a table before the session
Joseph EdwardsMarch 2025

Back to surveying

“Good news! I just got hired by a surveying firm and start on Monday.”
Alan SwensonMarch 2025

Earned an Emlid Reach RS2+

“Thanks Rami Tamimi and everyone at The Survey School who helped me get to level 7 to be lucky enough to earn this RS2+. I can't wait to put it to use.”
An Emlid Reach RS2+ receiver in its case on a desk
Hugh TullApril 2025

Accepted into Advanced Geomatics

“I just got accepted into BCIT's Advanced Geomatics program! Here's the cool part: instead of the full 2-year program, I'll be jumping straight into 2nd year... Feels like a natural progression after all we've been learning here in the Survey School community.”
Peter MorssinkJune 2026

A full set

“I received my RS3 and now I have a full set simplifying my workflow.”
Two Emlid GNSS receivers side by side in their cases
Al SpinaMarch 2025

Growing in a new field

“Thank you all for helping me grow in this new field and being a part of a great community! I received this wonderful tool today that will certainly help me grow and become more marketable.”
A boxed Emlid receiver on a counter

Each result is the member's own and is not typical.

What Survey School members say

Questions owners ask.

Find out before the client does.

Tell me about the business. If the Accelerator fits, we talk. If it does not, I will say so and point you to what does.